Grouting Technology & Equipment: Rehab Spotlight

January 2012, Vol. 67 No. 1
Avanti International AV-100

Grouting solutions from Avanti International, Logiball, Aries Industries, Prime Resins and CUES.

Avanti Intl.
AV-100 is an ultra-low viscosity chemically-activated gel. Having the same viscosity as water, AV-100 Chemical Grout has been successfully used for probe grouting, remote packer grouting, curtain grouting, and tube-a-manchette grouting for pre-excavation groundwater control, hazardous waste encapsulation, the prevention of structural movement due to groundwater, and sealing of entire sewer systems and underground transit systems. 281.486.5600,

Logiball manufactures a complete line of multisize reinforced inflatable plugs used for testing bypassing and controlling the flow in gravity sewers. Logiball also manufactures a complete line of carrier packers for the installation of trenchless point repairs (4”-36” pipes). Over the years we have developed state of the art test & seal grouting packers for mainline joints (6”-144”), elliptical pipes, lateral pipe joints (4”-8”) and lateral connection packers (6”-24” mainlines with 4”-6” laterals up to thirty feet from the connection).Over the last decade the Logiball Lateral Packers have been used to test & seal over 100,000 lateral connections. For quality field proven products and fast service contact Logiball. 800.246.5988,

Aries Industries
Aries_rehab focus.jpg
Aries' grout systems are designed and built for continuous operations. Aries offers a wide range of outfitting components and configurations to increase the production and reliability of the truck system including electrically driven Triplex CAT pumps for constant pumping pressure. A key feature is the five-part (penta) hose for reliable lateral grouting, larger volume water and mixing tanks for increased grouting capacity and a special winter operation package to increase equipment utilization throughout the year.

Prime Resins
The One Touch Packer saves time and money on injection of chemical grouts and epoxy resins in sound or deteriorating concrete. The 10 mm One Touch Packer is a cost-effective alternative to traditional high pressure injection ports and mechanical packers. Max pressure of the packer is 5,000 psi. The head is designed to break off using a standard hammer, increasing efficiency of finishing the injection holes once injection is complete. 800.321.7212,

BJM pump

BJM pump
BJM Pump

The J-Series electric submersible pumps offer top performance and high quality for a very modest investment. The pumps are designed for long life and trouble free performance. The J-Series electric submersible pumps offer top performance and high quality for a very modest investment.