- Current Issue
- Buyer's guide
Pro-Tec System Adapts To Unique Project
When you were younger, playing the game hide-and-seek was fun and a great way to just be a kid. When you are looking for a 36-inch pipe with a 42-inch casting and a 30-inch pipe with a 36-inch casting that is causing a short on active fuel lines at a depth of more than 20 feet, it really isn’t that fun of a game. That is what Price Gregory International was faced with on a site in Lisle, IL.
To meet this challenge, Price Gregory met with Scott Gross and Todd Larsen of Lee Jensen Sales Company Inc., Pro-Tec Equipment’s exclusive dealer in the greater Chicago area, and two of Pro-Tec Equipment’s Slide Rail staff, Josh Brown and Joshua Thorne.
“Before we arrived at the site, my previous conversations with Price Gregory had us thinking that this job was going to be a multiple bore pit job or a tight sheeting job,” said Scott Gross.
“When I got to the job-site, right away the overhead power lines stuck out as a main issue we had to take note of,” added Josh Brown, Pro-Tec Equipment Slide Rail site consultant. “It was decided right away that for Price Gregory to do this job properly, they couldn’t do it with tight sheeting, there just wasn’t enough vertical clearance to do so.”
“Once the decision was to go with the slide rail system, Joshua Thorne suggested using the Utility Panel Guide System. That system truly made the job a whole lot easier and faster,” remarked Scott.
With everything, there is a learning curve. This applies to the slide rail system as well. Even though the system looks similar to a trench shield system, the installation and removal are done differently and require more precision.
The Pro-Tec Equipment Utility Panel Guide System is part of the slide rail shoring system which is a modular, dig and push shoring system. The system is installed from the top down and removed from the bottom up, minimizing the size of excavations, soil disturbances and restoration time and cost. The installation is done with low vibration, providing soil support for excavations, adjacent structures and existing utilities. The Utility Panel Guide System allows those existing utilities to enter and exit the excavation site, and also provide a means for boring operations to take place in a safe and shored excavation.
Using excavators to do the heavy lifting, the installation of the system proceeded slower than usual due to the use of a hydrovac truck and hand digging every few feet to expose the two active lines that were the cause of the job. The system used on this job measured 20-foot wide by more than 40-feet long and 20-feet deep.